Plain White PU Decorative Baseboard SG-85134”

Baseboards, also known as skirting boards, are a type of decorative material commonly used in construction and interior design. They are typically installed at the bottom of walls to connect the wall and the floor, while also providing a protective layer for the wall against impacts and dirt

PRODUCT INFORMATION – BASEBOARD SG 85134

Product Name: Premium PU Baseboard SG 85134
Product Code: SG 85134
Material: Polyurethane (PU)
Dimensions: 15 x 120 mm – Length: 2400 mm
Origin: SinhGroup Classical Interior Construction Material Factory – Vietnam

With its water-resistant properties and protection against termite damage, the PU baseboard SG 85134 is an ideal choice for interior decoration, especially in areas prone to moisture, such as the base of walls.

In addition, the PU baseboard SG 85134 is considered quite easy to install due to its simple installation process, which helps save time and reduce costs during the installation

Advantages of the PU Baseboard SG 85134

The PU baseboard is increasingly popular due to its outstanding advantages compared to other types of moldings, such as

Resistant to moisture and mold, and more impact-resistant compared to gypsum baseboards; does not warp or suffer from termite damage like natural wood moldings.

Quick and easy to install compared to baseboards made of wood or gypsum.

Available in a variety of designs and sizes, with higher aesthetics and sharper detailing compared to other materials.

Highly durable, with no deformation or shrinkage after many years of use.

Available in a wide range of colors, offering many options suitable for all architectural styles.

Notes for Installing the PU Baseboard SG 85134

To ensure a neat and durable installation of the baseboard, there are some important points to keep in mind:

Preparation before installation

Necessary tools: Make sure you have all the required tools, such as a nail gun, cutter, stapler, hammer, adhesive, measuring tape, pencil, and putty for filling gaps and imperfections.

Surface Preparation: Before installation, inspect and clean the wall surface. Remove dust, cement debris, and address any uneven areas to ensure proper adhesion of the baseboard.

Standard Installation Steps

Measuring and Marking: Use a measuring tape to determine the required length of the baseboard. Accurately mark the cutting positions with a pencil.

Cutting the Baseboard: When cutting the baseboard, note the following:

Cut a 45-degree angle at wall corners to ensure a tight fit.

If joining two boards on the same wall, cut them at a 30-degree angle.

Installing the Baseboard: Use a nail gun to secure the baseboard to the wall. Ensure the distance between nail points is between 30 and 50 cm.

Sealing Joints: Use silicone adhesive and colored putty to conceal joints and nail holes, enhancing the overall aesthetics of the project.

Other Notes

Choose Quality Materials: Use PU baseboards from reputable and well-known suppliers to ensure durability and aesthetic appeal, avoiding low-quality products.

Installer’s Skill: Ensure that the installer is skilled and follows the proper technical procedures to minimize errors during the installation process.

Thorough Preparation: Plan carefully and conduct an on-site survey before installation to prevent unnecessary mistakes.

Common Mistakes When Installing PU Baseboards

During the installation of PU baseboards, several common mistakes can affect the aesthetics and durability of the project. Below are the typical errors and their causes:

Exposed Joints: This is a common mistake caused by low installer skill, resulting in poorly treated joints and compromising the wall’s aesthetics.

Fading or Cracking Baseboards: This issue is often caused by using low-quality moldings or materials unsuitable for the local climate, leading to damage after a short period.

Incorrect Adhesive Application: Uneven or insufficient adhesive can reduce the baseboard’s adhesion, causing peeling or loosening.

Careless Installation: Negligence or lack of attention by the installer can result in multiple errors affecting the project.

Inconsistent Design Style: Choosing moldings that do not match the overall design style of the space can create a monotonous and unharmonious appearance.

Improper Wall Surface Preparation: If the wall surface is not properly cleaned and prepared before installation, the baseboard will not adhere well, leading to bulging or sinking.